diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h
index eb3fa57..2c2682c 100644
--- a/include/configs/guruplug.h
+++ b/include/configs/guruplug.h
@@ -33,59 +33,13 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_MARVELL		1
-#define CONFIG_ARM926EJS	1	/* Basic Architecture */
 #define CONFIG_SHEEVA_88SV131	1	/* CPU Core subversion */
 #define CONFIG_KIRKWOOD		1	/* SOC Family Name */
 #define CONFIG_KW88F6281	1	/* SOC Name */
 #define CONFIG_MACH_GURUPLUG	/* Machine type */
-
-#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
 
 /*
- * CLKs configurations
- */
-#define CONFIG_SYS_HZ		1000
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE
-
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
-					  115200,230400, 460800, 921600 }
-/* auto boot */
-#define CONFIG_BOOTDELAY	3	/* default enable autoboot */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
-#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
-
-#define	CONFIG_SYS_PROMPT	"Marvell>> "	/* Command Prompt */
-#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
-#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
-		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
-/*
  * Commands configuration
  */
 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
@@ -96,18 +50,13 @@
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_USB
+#define CONFIG_CMD_IDE
 
 /*
- * NAND configuration
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
  */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_KIRKWOOD
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS			1
-#define CONFIG_SYS_NAND_BASE		0xD8000000	/* KW_DEFADR_NANDF */
-#define NAND_ALLOW_ERASE_ALL		1
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-#endif
+#include "mv-common.h"
 
 /*
  *  Environment variables configurations
@@ -143,55 +92,19 @@
 	"x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
 
 /*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 128) /* 128kB for malloc() */
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-
-/*
- * Other required configurations
- */
-#define CONFIG_CONSOLE_INFO_QUIET	/* some code reduction */
-#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT	/* call arch_misc_init() */
-#define CONFIG_DISPLAY_CPUINFO	/* Display cpu info */
-#define CONFIG_NR_DRAM_BANKS	4
-#define CONFIG_STACKSIZE	0x00100000	/* regular stack- 1M */
-#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
-#define CONFIG_SYS_MEMTEST_START 0x00800000	/* 8M */
-#define CONFIG_SYS_MEMTEST_END	0x1fffffff	/*(_512M -1) */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-
-/*
  * Ethernet Driver configuration
  */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_NETCONSOLE	/* include NetConsole support   */
-#define CONFIG_NET_MULTI	/* specify more that one ports available */
-#define CONFIG_MII		/* expose smi ove miiphy interface */
-#define CONFIG_CMD_MII
-#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #define CONFIG_MVGBE_PORTS	{1, 1}	/* enable both ports */
 #define CONFIG_PHY_BASE_ADR	0
-#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
-#define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv88e1121 PHY */
 #endif /* CONFIG_CMD_NET */
 
 /*
- * USB/EHCI
+ * SATA Driver configuration
  */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI			/* Enable EHCI USB support */
-#define CONFIG_USB_EHCI_KIRKWOOD	/* on Kirkwood platform	*/
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-#define CONFIG_SUPPORT_VFAT
-#endif /* CONFIG_CMD_USB */
+#ifdef CONFIG_MVSATA_IDE
+#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
+#endif /*CONFIG_MVSATA_IDE*/
 
 #define CONFIG_SYS_ALT_MEMTEST
 
diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
new file mode 100644
index 0000000..e78d29f
--- /dev/null
+++ b/include/configs/mv-common.h
@@ -0,0 +1,225 @@
+/*
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/*
+ * This file contains Marvell Board Specific common defincations.
+ * This file should be included in board config header file.
+ *
+ * It supports common definations for Kirkwood platform
+ * TBD: support for Orion5X platforms
+ */
+
+#ifndef _MV_COMMON_H
+#define _MV_COMMON_H
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_MARVELL		1
+#define CONFIG_ARM926EJS	1	/* Basic Architecture */
+
+#if defined(CONFIG_KIRKWOOD)
+#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
+#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
+#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
+#define CONFIG_KIRKWOOD_PCIE_INIT       /* Enable PCIE Port0 for kernel */
+
+#define CONFIG_I2C_MVTWSI_BASE	KW_TWSI_BASE
+#define MV_UART0_BASE		KW_UART0_BASE
+#define MV_SATA_BASE		KW_SATA_BASE
+#define MV_SATA_PORT0_OFFSET	KW_SATA_PORT0_OFFSET
+#define MV_SATA_PORT1_OFFSET	KW_SATA_PORT1_OFFSET
+
+#else
+#error "Unsupported SoC"
+#endif
+
+/*
+ * CLKs configurations
+ */
+#define CONFIG_SYS_HZ		1000
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
+#define CONFIG_SYS_NS16550_COM1		MV_UART0_BASE
+
+/*
+ * Serial Port configuration
+ * The following definitions let you select what serial you want to use
+ * for your console driver.
+ */
+
+#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
+					  115200,230400, 460800, 921600 }
+/* auto boot */
+#define CONFIG_BOOTDELAY	3	/* default enable autoboot */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
+#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
+#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
+
+#define	CONFIG_SYS_PROMPT	"Marvell>> "	/* Command Prompt */
+#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
+#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
+		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
+
+/*
+ * NAND configuration
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_KIRKWOOD
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS			1
+#define CONFIG_SYS_NAND_BASE		0xD8000000	/* MV_DEFADR_NANDF */
+#define NAND_ALLOW_ERASE_ALL		1
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+#endif
+
+/*
+ * SPI Flash configuration
+ */
+#ifdef CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH		1
+#define CONFIG_HARD_SPI			1
+#define CONFIG_KIRKWOOD_SPI		1
+#define CONFIG_SPI_FLASH_MACRONIX	1
+#define CONFIG_ENV_SPI_BUS		0
+#define CONFIG_ENV_SPI_CS		0
+#define CONFIG_ENV_SPI_MAX_HZ		50000000	/*50Mhz */
+#endif
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN	(1024 * 1024) /* 1MiB for malloc() */
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+
+/*
+ * Other required minimal configurations
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_CONSOLE_INFO_QUIET	/* some code reduction */
+#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
+#define CONFIG_ARCH_MISC_INIT	/* call arch_misc_init() */
+#define CONFIG_DISPLAY_CPUINFO	/* Display cpu info */
+#define CONFIG_NR_DRAM_BANKS	4
+#define CONFIG_STACKSIZE	0x00100000	/* regular stack- 1M */
+#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
+#define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
+#define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
+#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_NETCONSOLE	/* include NetConsole support   */
+#define CONFIG_NET_MULTI	/* specify more that one ports available */
+#define	CONFIG_MII		/* expose smi ove miiphy interface */
+#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
+#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
+#define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * USB/EHCI
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI		/* Enable EHCI USB support */
+#define CONFIG_USB_EHCI_KIRKWOOD
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+#define CONFIG_SUPPORT_VFAT
+#endif /* CONFIG_CMD_USB */
+
+/*
+ * IDE Support on SATA ports
+ */
+#ifdef CONFIG_CMD_IDE
+#define __io
+#define CONFIG_CMD_EXT2
+#define CONFIG_MVSATA_IDE
+#define CONFIG_IDE_PREINIT
+#define CONFIG_MVSATA_IDE_USE_PORT1
+/* Needs byte-swapping for ATA data register */
+#define CONFIG_IDE_SWAP_IO
+/* Data, registers and alternate blocks are at the same offset */
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0100)
+#define CONFIG_SYS_ATA_REG_OFFSET	(0x0100)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x0100)
+/* Each 8-bit ATA register is aligned to a 4-bytes address */
+#define CONFIG_SYS_ATA_STRIDE		4
+/* Controller supports 48-bits LBA addressing */
+#define CONFIG_LBA48
+/* CONFIG_CMD_IDE requires some #defines for ATA registers */
+#define CONFIG_SYS_IDE_MAXBUS		2
+#define CONFIG_SYS_IDE_MAXDEVICE	2
+/* ATA registers base is at SATA controller base */
+#define CONFIG_SYS_ATA_BASE_ADDR	MV_SATA_BASE
+#endif /* CONFIG_CMD_IDE */
+
+/*
+ * I2C related stuff
+ */
+#ifdef CONFIG_CMD_I2C
+#define CONFIG_I2C_MVTWSI
+#define CONFIG_SYS_I2C_SLAVE		0x0
+#define CONFIG_SYS_I2C_SPEED		100000
+#endif
+
+/*
+ * File system
+ */
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_LZO
+
+#endif /* _MV_COMMON_H */
diff --git a/include/configs/mv88f6281gtw_ge.h b/include/configs/mv88f6281gtw_ge.h
index 9ef03a6..d323829 100644
--- a/include/configs/mv88f6281gtw_ge.h
+++ b/include/configs/mv88f6281gtw_ge.h
@@ -33,66 +33,19 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_MARVELL		1
-#define CONFIG_ARM926EJS	1	/* Basic Architecture */
 #define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
 #define CONFIG_KIRKWOOD		1	/* SOC Family Name */
 #define CONFIG_KW88F6281	1	/* SOC Name */
 #define CONFIG_MACH_MV88F6281GTW_GE	/* Machine type */
-
-#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
-#define CONFIG_KIRKWOOD_PCIE_INIT	/* Enable PCIE Port0 for kernel */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
 
 /*
- * CLKs configurations
- */
-#define CONFIG_SYS_HZ		1000
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE
-
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
-					  115200,230400, 460800, 921600 }
-/* auto boot */
-#define CONFIG_BOOTDELAY	3	/* default enable autoboot */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
-#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
-
-#define	CONFIG_SYS_PROMPT	"Marvell>> "	/* Command Prompt */
-#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
-#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
-		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
-/*
  * Commands configuration
  */
 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
 #include <config_cmd_default.h>
-#define CONFIG_CMD_AUTOSCRIPT
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_PING
@@ -100,17 +53,18 @@
 #define CONFIG_CMD_USB
 
 /*
- * Flash configuration
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
  */
-#ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH		1
-#define CONFIG_HARD_SPI			1
-#define CONFIG_KIRKWOOD_SPI		1
-#define CONFIG_SPI_FLASH_MACRONIX	1
-#define CONFIG_ENV_SPI_BUS		0
-#define CONFIG_ENV_SPI_CS		0
-#define CONFIG_ENV_SPI_MAX_HZ		50000000	/*50Mhz */
-#endif
+#include "mv-common.h"
+
+/* Unwanted stuffs from mv-common.h */
+#undef	CONFIG_CMD_EXT2
+#undef	CONFIG_CMD_JFFS2
+#undef	CONFIG_CMD_FAT
+#undef	CONFIG_CMD_UBI
+#undef	CONFIG_CMD_UBIFS
+#undef	CONFIG_RBTREE
 
 /*
  *  Environment variables configurations
@@ -142,59 +96,11 @@
 	"x_bootargs_root=root=/dev/mtdblock3 ro rootfstype=squashfs\0"
 
 /*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 128) /* 128kB for malloc() */
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-
-/*
- * Other required minimal configurations
- */
-#define CONFIG_CONSOLE_INFO_QUIET	/* some code reduction */
-#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT	/* call arch_misc_init() */
-#define CONFIG_DISPLAY_CPUINFO	/* Display cpu info */
-#define CONFIG_NR_DRAM_BANKS	4
-#define CONFIG_STACKSIZE	0x00100000	/* regular stack- 1M */
-#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
-#define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
-#define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-
-/*
  * Ethernet Driver configuration
  */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_NETCONSOLE	/* include NetConsole support   */
-#define CONFIG_NET_MULTI	/* specify more that one ports available */
-#define	CONFIG_MII		/* expose smi ove miiphy interface */
-#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
-#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
-#endif /* CONFIG_CMD_NET */
-
-/*
- * Marvell 88Exxxx Switch configurations
- */
-#define CONFIG_RESET_PHY_R	/* use reset_phy() to init phy/swtich */
 #define CONFIG_MV88E61XX_SWITCH	/* Enable mv88e61xx switch driver */
-
-/*
- * USB/EHCI
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI			/* Enable EHCI USB support */
-#define CONFIG_USB_EHCI_KIRKWOOD	/* on Kirkwood platform	*/
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-#define CONFIG_SUPPORT_VFAT
-#endif /* CONFIG_CMD_USB */
+#endif /* CONFIG_CMD_NET */
 
 #endif /* _CONFIG_MV88F6281GTW_GE_H */
diff --git a/include/configs/openrd_base.h b/include/configs/openrd_base.h
index 846dfcd..cfdd09c 100644
--- a/include/configs/openrd_base.h
+++ b/include/configs/openrd_base.h
@@ -38,60 +38,13 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_MARVELL		1
-#define CONFIG_ARM926EJS	1	/* Basic Architecture */
 #define CONFIG_SHEEVA_88SV131	1	/* CPU Core subversion */
 #define CONFIG_KIRKWOOD		1	/* SOC Family Name */
 #define CONFIG_KW88F6281	1	/* SOC Name */
 #define CONFIG_MACH_OPENRD_BASE	/* Machine type */
-
-#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
-#define CONFIG_KIRKWOOD_PCIE_INIT       /* Enable PCIE Port0 for kernel */
 
 /*
- * CLKs configurations
- */
-#define CONFIG_SYS_HZ		1000
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE
-
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
-					  115200,230400, 460800, 921600 }
-/* auto boot */
-#define CONFIG_BOOTDELAY	3	/* default enable autoboot */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
-#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
-
-#define	CONFIG_SYS_PROMPT	"Marvell>> "	/* Command Prompt */
-#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
-#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
-		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
-/*
  * Commands configuration
  */
 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
@@ -106,15 +59,10 @@
 #define CONFIG_CMD_IDE
 
 /*
- * NAND configuration
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
  */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_KIRKWOOD
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS			1
-#define CONFIG_SYS_NAND_BASE		0xD8000000	/* KW_DEFADR_NANDF */
-#define NAND_ALLOW_ERASE_ALL		1
-#endif
+#include "mv-common.h"
 
 /*
  *  Environment variables configurations
@@ -154,97 +102,19 @@
 	"mtdparts="MTDPARTS_DEFAULT"\0"
 
 /*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 1024) /* 1MiB for malloc() */
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-
-/*
- * Other required minimal configurations
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT	/* call arch_misc_init() */
-#define CONFIG_DISPLAY_CPUINFO	/* Display cpu info */
-#define CONFIG_NR_DRAM_BANKS	4
-#define CONFIG_STACKSIZE	0x00100000	/* regular stack- 1M */
-#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
-#define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
-#define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-
-/*
  * Ethernet Driver configuration
  */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_NETCONSOLE	/* include NetConsole support   */
-#define CONFIG_NET_MULTI	/* specify more that one ports available */
-#define	CONFIG_MII		/* expose smi ove miiphy interface */
-#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	0x8
-#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
-#define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
 #endif /* CONFIG_CMD_NET */
 
 /*
- * USB/EHCI
+ * SATA Driver configuration
  */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI			/* Enable EHCI USB support */
-#define CONFIG_USB_EHCI_KIRKWOOD	/* on Kirkwood platform	*/
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-#define CONFIG_SUPPORT_VFAT
-#endif /* CONFIG_CMD_USB */
-
-/*
- * IDe Support on SATA port0
- */
-#ifdef CONFIG_CMD_IDE
-#define __io
-#define CONFIG_CMD_EXT2
-#define CONFIG_MVSATA_IDE
-#define CONFIG_IDE_PREINIT
-#define CONFIG_MVSATA_IDE_USE_PORT1
-/* Needs byte-swapping for ATA data register */
-#define CONFIG_IDE_SWAP_IO
-/* Data, registers and alternate blocks are at the same offset */
-#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0100)
-#define CONFIG_SYS_ATA_REG_OFFSET	(0x0100)
-#define CONFIG_SYS_ATA_ALT_OFFSET	(0x0100)
-/* Each 8-bit ATA register is aligned to a 4-bytes address */
-#define CONFIG_SYS_ATA_STRIDE		4
-/* Controller supports 48-bits LBA addressing */
-#define CONFIG_LBA48
-/* CONFIG_CMD_IDE requires some #defines for ATA registers */
-#define CONFIG_SYS_IDE_MAXBUS		2
-#define CONFIG_SYS_IDE_MAXDEVICE	2
-/* ATA registers base is at SATA controller base */
-#define CONFIG_SYS_ATA_BASE_ADDR	KW_SATA_BASE
-/* ATA bus 0 is Kirkwood port 0 on openrd */
-#define CONFIG_SYS_ATA_IDE0_OFFSET	KW_SATA_PORT0_OFFSET
-/* ATA bus 1 is Kirkwood port 1 on openrd */
-#define CONFIG_SYS_ATA_IDE1_OFFSET	KW_SATA_PORT1_OFFSET
-#endif /* CONFIG_CMD_IDE */
-
-/*
- * File system
- */
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_LZO
+#ifdef CONFIG_MVSATA_IDE
+#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
+#define CONFIG_SYS_ATA_IDE1_OFFSET	MV_SATA_PORT1_OFFSET
+#endif /*CONFIG_MVSATA_IDE*/
 
 #endif /* _CONFIG_OPENRD_BASE_H */
diff --git a/include/configs/rd6281a.h b/include/configs/rd6281a.h
index 5857301..60f9579 100644
--- a/include/configs/rd6281a.h
+++ b/include/configs/rd6281a.h
@@ -33,59 +33,13 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_MARVELL		1
-#define CONFIG_ARM926EJS	1	/* Basic Architecture */
 #define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
 #define CONFIG_KIRKWOOD		1	/* SOC Family Name */
 #define CONFIG_KW88F6281	1	/* SOC Name */
 #define CONFIG_MACH_RD6281A		/* Machine type */
-
-#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
 
 /*
- * CLKs configurations
- */
-#define CONFIG_SYS_HZ		1000
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE
-
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
-					  115200,230400, 460800, 921600 }
-/* auto boot */
-#define CONFIG_BOOTDELAY	3	/* default enable autoboot */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs */
-#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
-
-#define	CONFIG_SYS_PROMPT	"Marvell>> "	/* Command Prompt */
-#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
-#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
-		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
-/*
  * Commands configuration
  */
 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
@@ -97,17 +51,13 @@
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_USB
+#define CONFIG_CMD_IDE
 
 /*
- * NAND configuration
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
  */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_KIRKWOOD
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS			1
-#define CONFIG_SYS_NAND_BASE		0xD8000000	/* KW_DEFADR_NANDF */
-#define NAND_ALLOW_ERASE_ALL		1
-#endif
+#include "mv-common.h"
 
 /*
  * Environment variables configurations
@@ -143,56 +93,23 @@
 	"x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
 
 /*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 128) /* 128kB for malloc() */
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-
-/*
- * Other required minimal configurations
- */
-#define CONFIG_CONSOLE_INFO_QUIET	/* some code reduction */
-#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT	/* call arch_misc_init() */
-#define CONFIG_DISPLAY_CPUINFO	/* Display cpu info */
-#define CONFIG_NR_DRAM_BANKS	4
-#define CONFIG_STACKSIZE	0x00100000	/* regular stack- 1M */
-#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
-#define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
-#define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-
-/*
  * Ethernet Driver configuration
  */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_NETCONSOLE	/* include NetConsole support */
-#define CONFIG_NET_MULTI	/* specify more that one ports available */
-#define CONFIG_MII		/* expose smi ove miiphy interface */
-#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
 #define CONFIG_MVGBE_PORTS	{1, 1}	/* enable both ports */
 #define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
 #define CONFIG_DIS_AUTO_NEG_SPEED_GMII /*Disable Auto speed negociation */
 #define CONFIG_PHY_SPEED	_1000BASET	/*Force PHYspeed to 1GBPs */
 #define CONFIG_PHY_BASE_ADR	0x0A
-#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
-#define CONFIG_RESET_PHY_R	/* use reset_phy() to init switch and PHY */
 #define CONFIG_MV88E61XX_SWITCH	/* Enable MV88E61XX switch driver */
 #endif /* CONFIG_CMD_NET */
 
 /*
- * USB/EHCI
+ * SATA Driver configuration
  */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI			/* Enable EHCI USB support */
-#define CONFIG_USB_EHCI_KIRKWOOD	/* on Kirkwood platform	*/
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-#define CONFIG_SUPPORT_VFAT
-#endif /* CONFIG_CMD_USB */
+#ifdef CONFIG_MVSATA_IDE
+#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
+#define CONFIG_SYS_ATA_IDE1_OFFSET	MV_SATA_PORT1_OFFSET
+#endif /*CONFIG_MVSATA_IDE*/
 
 #endif /* _CONFIG_RD6281A_H */
diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index c5de86e..83dd8ff 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -33,82 +33,28 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_MARVELL		1
-#define CONFIG_ARM926EJS	1	/* Basic Architecture */
 #define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
 #define CONFIG_KIRKWOOD		1	/* SOC Family Name */
 #define CONFIG_KW88F6281	1	/* SOC Name */
 #define CONFIG_MACH_SHEEVAPLUG	/* Machine type */
-
-#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
-
-/*
- * CLKs configurations
- */
-#define CONFIG_SYS_HZ		1000
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE
-
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
-					  115200,230400, 460800, 921600 }
-/* auto boot */
-#define CONFIG_BOOTDELAY	3	/* default enable autoboot */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
-#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
-
-#define	CONFIG_SYS_PROMPT	"Marvell>> "	/* Command Prompt */
-#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
-#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
-		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
 
 /*
  * Commands configuration
  */
 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
 #include <config_cmd_default.h>
-#define CONFIG_CMD_AUTOSCRIPT
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_USB
-
 /*
- * NAND configuration
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
  */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_KIRKWOOD
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS			1
-#define CONFIG_SYS_NAND_BASE		0xD8000000	/* KW_DEFADR_NANDF */
-#define NAND_ALLOW_ERASE_ALL		1
-#endif
+#include "mv-common.h"
 
 /*
  *  Environment variables configurations
@@ -144,58 +90,14 @@
 	"x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
 
 /*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 1024) /* 1 MiB for malloc() */
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-
-/*
- * Other required minimal configurations
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT	/* call arch_misc_init() */
-#define CONFIG_DISPLAY_CPUINFO	/* Display cpu info */
-#define CONFIG_NR_DRAM_BANKS	4
-#define CONFIG_STACKSIZE	0x00100000	/* regular stack- 1M */
-#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
-#define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
-#define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-
-/*
  * Ethernet Driver configuration
  */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_NETCONSOLE	/* include NetConsole support   */
-#define CONFIG_NET_MULTI	/* specify more that one ports available */
-#define	CONFIG_MII		/* expose smi ove miiphy interface */
-#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	0
-#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
-#define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
 #endif /* CONFIG_CMD_NET */
 
 /*
- * USB/EHCI
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI			/* Enable EHCI USB support */
-#define CONFIG_USB_EHCI_KIRKWOOD	/* on Kirkwood platform	*/
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-#define CONFIG_SUPPORT_VFAT
-#endif /* CONFIG_CMD_USB */
-
-/*
  * File system
  */
 #define CONFIG_CMD_EXT2